Maintenance of Your Boat Trailer: 9 Tips and Tricks
Transporting your precious inflatable boat requires a trailer in perfect condition! That's why today Orca Retail offers you 8 tips to ensure the longevity of your trailer, from brake checks to maintenance of galvanized parts. These practical tips will allow you to fully enjoy your outings in complete safety!
Tip 1: Check your car's brakes
Before hitting the road, perform a brake test at 10-15 km/h to ensure that the wheels lock simultaneously, the trailer stays in line, and the braking is smooth. If there are any issues, consult a professional for optimal adjustment.
Tip 2: Check the electrical part
Before each journey, check the proper functioning of the rear lights of your trailer. Opt for waterproof lights to facilitate maintenance and reduce vibrations during transport.
Tip 3: Grease the necessary parts
Elements like the hitch ball, screws, bearings, and rollers should be regularly cleaned and greased. This protects against corrosion, especially before winter storage.
Tip 4: Check your tires and wheels
Properly inflated tires contribute to safer driving and even wear. Regularly check the pressure of the trailer's tires.
Additionally, ensure the proper functioning of the jockey wheel by turning it completely. Regular greasing is essential to ensure its proper operation.
Tip 5: Balance the loads
Always adhere to the recommended weight limits for your trailer. Ensure the load is evenly distributed on the trailer to avoid any imbalance during transport, which could affect handling.
Tip 6: Inspect straps and fasteners
Before each trip, check the condition of the tie-down straps and retaining devices. Worn or damaged straps can compromise transport safety.
Tip 7: Rinse the trailer
After each use, rinse the trailer thoroughly to remove any salt residue, thus preventing corrosion. Then drive for a few minutes to drain residual water.
Tip 8: Clean the Galvanized Parts
Clean the galvanized parts after each use to prevent corrosion. Saltwater can cause rust stains, requiring careful cleaning. Apply anti-corrosion products on exposed metal parts to protect the trailer against rust.
When launching, make sure to immerse the wheels only up to the tire crown to prevent any oxidation.
Tip 9: Prepare for Winter Storage
When preparing for winter storage, elevate the wheels using a jack to prevent tire deformation. Use jack stands for stable support. Finally, also protect the electrical parts against potential damage.
Conclusion
Follow these practical tips to ensure the longevity of your boat trailer. With regular maintenance, sail safely and fully enjoy your passion.
Discover our products!
Read more about the world of RIBs:
